Workbench Viking Gamma 1500x700 mm, GM-15-7/L TEC

Lead time
6-8 Wochen

Workbench Serie VIKING Gamma 1500x700 mm with power panel, LED lighting, additional shelf and optional drawer units

Excl. 19% VAT,excl. Shipping Cost

Viking Online-Configurator

Viking Configurator

We carry only the best products from top manufacturers.

Turn to us with confidence, our friendly team is here to help you.

GM GAMMA Workbench

The workbench is supplied in a set: workbench with inverted-L shape side supports, main shelf, upper LED lighting, upper and lower perforated panels and side built-in power panel.

Available in two versions, depending on the location of built-in power panel: with the right (PR in coding, for example GM-18/ PR) or the left (L in coding, for example GM-12/L) power unit in the side panel. The built-in power panel is equipped with 6 sockets (5 with grounding and one without grounding) and a switch button.

Tabletop height adjustment: 3 positions - 740mm, 800mm, 860mm. Additional supports height adjustment - 20 mm.

Upper LED lighting is built into the top horizontal hanger above the tabletop.

  • Color temperature 3950-4000 K;
  • Luminous flux: 4490 Lm;
  • Power consumption: 38 W;
  • Provides at least 1260-lux illuminance at 1000 mm distance from the light source.

All technical communications are easily accessible by opening the board in side supports.

  • for tabletop up to 200 kg
  • for shelf up to 200 kg

Additional options:

GM-PO/1 Additional shelf

  • 1330-1870 mm with a 60 mm pitch
  • depth 400 mm

GM-DL-6 GAMMA Under-shelf LED Lighting

  • Dimensions 748×50×177 mm
  • Angle adjustment - 10°.

GM-EPA Power panel

½GM-EPA Half-size Power panel

Half-size Power panel can be mounted below the main shelf or under the tabletop, GM-EPA Power panel main panel can be mounted on the tabletop with the front side to and fro.
An aluminum case/ two cases with four sockets, protective contact, switch and 3 m cable. Can be equipped with additional sockets, fuses, phone jacks and earth leakage circuit breakers.
Nominal load capacity: 10 A.

Optional drawer units TP-01/P, TP-02/P

Optional drawer units with reduced depth TP-10/P, TP-20/P

Storage solution for tools and components, no place on floor required. Those with reduced to 490 mm depth allow installing various additional equipment under a tabletop.

More Information
Lead time6-8 Wochen